Instructions Of Interior Painting

Interior painting requires as careful planning of surfaces as does external painting. The introduction of odorless paints now can help you paint any time of the year. Formerly, most interior painting in the house was done in the drop or spring, when it had been possible to leave the home windows open to ventilate the area. But open windows brought dirt in to the room to mar the finished painted surface.

A good interior paint job is frequently 50% planning and 50% painting. Do not rush in preparing the floors in your eagerness to get at the brush or roller. If you do not prepare the surfaces properly, you will be back with the color brush or roller in a few months.

In this section you will discover the necessary information on the application of different types of paints on various interior wall, ceiling and floor materials.

Plaster

New dry plaster in good shape, which is to be finished with a paint apart from water paint, ought to be given a layer of primer-sealer and permitted to dry thoroughly before becoming inspected for uniformity of look. Variations in gloss and colour differences regarding tinted primers indicate whether or not the whole surface has been entirely sealed. If not, another coat of primer-sealer should be applied. If only a few "suction spots" are apparent, a second coat over these areas may be sufficient.

A flat, semi-gloss, or high-gloss finish could be put on the primed surface. For a flat finish, two coats of flat wall paint should follow the priming coating. For a semi-gloss surface finish, one coat of flat wall paint and one coat of semi-gloss paint should be applied to the primed surface. For a high-gloss end, one coat of semi-gloss paint and one coat of high-gloss enamel should be used over the priming coat.

Before applying normal water paints of the calcimine form to new plastered walls they should be sized, using either a glue-water size or, if the plaster can be dry, a slim varnish or primer-sealer.

Cool water paints of the casein variety may be applied either right to a plastered surface, or the surface may be first given a layer of primer-sealer to equalize uneven suction outcomes. The same is true of resin-emulsion paints, with the recommendations of the manufacturer of the merchandise being given preference in the event of doubt. Since resin-emulsion paints normally contain some oil in the binder, they ought to ordinarily be applied and then plaster which has dried thoroughly.

Texture wall paints could also be used on plaster surfaces. The benefits of this sort of paint are that one coating economically makes a textured decoration and relieves the monotony of simple flat paint. Franklin Painting NJ 07416 It also covers cracks or patches in the plaster extra completely than ordinary wall paint. The cons of texture wall paint are that they Collect dust and are difficult to restore to a smooth end. These materials can be found as water-or oil-based paints, will be thicker than ordinary wall paints, and may be applied to wallboard in addition to plaster to produce textured effects such as for example random, Spanish, objective, and multicolored.

Composition Wallboard

Composition wallboard usually presents no particular painting difficulties if the normal precautions are observed, such as making certain that the top is dry and free from grease and oil. The painting process of wallboard is equivalent to for plaster; it needs a priming and sealing coat accompanied by whatever finishes coats are wanted, or could be given one-coat toned or resin-emulsion type paint.

Wallpaper

Water-thinned paint may be applied to wallpaper that is well- bonded to the walls and will not contain dyes which might bleed into the color. One thickness of wallpaper can be preferable for paint application. Paints other than those of the water-thinned style can also be applied to wallpaper by following a instructions given for painting plaster. Nevertheless, wallpaper coated with this type of paint is difficult to remove without problems for the plaster.

Wood Walls and Trim

New interior walls and timber trim should be smoothed with sand-papers and dusted before painting or varnishing. To preserve the grain of the solid wood, the surface could be rubbed with linseed oil, varnished or shellacked, and waxed. If an opaque finish is desired, semi-gloss paint thinned with 1 pint of turpen-tine per gallon of paint or the primer-sealer formerly described for walls can be utilized as a priming coat on wood. A couple of coats of semi-gloss paint should then be applied over the thoroughly dry prime coating, or in case a full-gloss finish is desired, the final coat ought to be a high-gloss enamel.

Masonry Walls and Ceilings

Interior masonry walls and ceilings above grade may, in general, be painted in quite similar manner as plaster surfaces. In this article again, it is necessary to allow adequate time for the masonry to dry out before applying paint and, furthermore, attention should be directed at the preparation of the surface. When decorating a wall containing Portland cement (concrete, for example), it is essential to take precautions contrary to the attack of alkali. For this function, alkali-resistant primers such as for example rubber-base paints can be utilized when oil paints are to check out.

Cement-water paints are best suited for application to basement wall space which are damp as a result of leakage or condensation. To apply these paints, the same procedure ought to be followed as is described here for painting exterior masonry surfaces.